The AQUAVAR Model 56 controller features all of the same control methods of the standard AQUAVAR Controllers, but in a smaller package for use with 1/2 to 3 horsepower pumps. Differences are as follows.

Motor Mount
In the motor mounted version, the AQUAVAR Model 56 controller uses a single bolt to attach to the fan cover of a NEMA 56 or NEMA 48 frame TEFC motor.

Programming Pad
On the AQUAVAR Model 56 controller, programming is completed with a removable pad, which is normally not sold with the controller. This pad is used by the installing technician, but would seldom be used afterwards. It is possible for the user to change the set pressure of the system and correct faults without the programming capability. The control pad is available separately.

Slave Mode
The AQUAVAR Model 56 controller may be connected to a second pump in two ways. The first is a part of a multi-pump system where each pump has a controller. In addition the AQUAVAR Model 56 controller can be programmed to turn a standard full speed pump on and off when system demands exceed single pump capacity.

Home • AQUAVAR • AQUAVAR 56 • HydroView • AquaBoost • Literature • Contact Us • AAA Water Systems Web Site